9 Best Transfer Switches for Anker SOLIX Power Stations (November 2026)
The best Anker SOLIX transfer switch and home power panel options include the The Original EZ GENERATOR SWITCH for compact essential circuits, the IGEYAPA 100Amp AC110V Automatic/Manual Transfer Switch 2P for automatic source switching, and the Connecticut Electric Series 2 Backup Power Manual for 50 amp multi-circuit kits.
On this page (8 sections)
- Our top Anker SOLIX transfer switch picks for home backup
- How to compare an Anker SOLIX transfer switch and home power panel cable
- Can a manual transfer switch work with an Anker SOLIX station?
- Which automatic transfer switch is best for fast changeover?
- What size transfer switch do I need for home circuits?
- Do you need an Anker SOLIX home power panel cable or a generic switch?
- How fast should a transfer switch change sources?
- Which Anker SOLIX transfer switch should you buy?
The best Anker SOLIX transfer switch for most homes is the Anker SOLIX F3800 Plus kit, because it is made to connect that station to home circuits. If you already own a different station, a manual panel switch may be a better fit.
A transfer switch isolates home circuits from utility power. That isolation helps prevent backfeeding, which can endanger utility workers and damage equipment.
It also lets you choose only the circuits you need during an outage.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared amps, circuit counts, voltage, mounting, included cords and inlets, and the type of power source each switch is shown to work with.
Start with the best portable power station guide if you have not chosen a station yet. For larger whole home plans, read our whole home battery backup system guide before you pick a switch size.
Our picks at a glance
-
1
Best for compact essential circuitsThe Original EZ GENERATOR SWITCH
9.7/10 our score
See it on Amazon -
2
Best for automatic source switchingIGEYAPA 100Amp AC110V Automatic/Manual Transfer Switch 2P
9.6/10 our score
See it on Amazon -
3
Best for 50 amp multi-circuit kitsConnecticut Electric Series 2 Backup Power Manual
9.3/10 our score
See it on Amazon
- 4
Check itXantrex 8080915 PROwatt SW Auto Transfer Switch
Best for inverter backup systems - 5
Check itNature's Generator 30 Amp Manual Transfer Switch
Best for six circuit home backup - 6
Check itGoal Zero Yeti Home Integration Kit Transfer
Best for four circuit panel backup - 7
Check itAnker SOLIX F3800 Plus Portable Power Station
Best for Anker SOLIX home backup - 8
Check itNature's Generator 50 Amp Manual Transfer Switch
Best for 120/240 V flexibility - 9
Check itReliance Controls Pro/Tran2 Transfer Switch 306D
Best for compact manual control
Our top Anker SOLIX transfer switch picks for home backup
The F3800 Plus is the clearest Anker SOLIX match, while the other switches cover manual panel backup, automatic changeover and inverter use. Match the switch to your station, panel type and voltage first.
The Original EZ GENERATOR SWITCH: Best for compact essential circuits
- 20 A manual transfer switch
- UL/CSA approved
- Battery inverter friendly
A small manual switch for essential loads such as lights, refrigeration and sump pumps, with bonded or floating neutral options.
Pros
- Compact 4 x 4 x 4 inch size
- Works with battery inverters
- No backfeeding design
Cons
- Manual operation only
- Limited to essential loads named in its rating
The Original EZ Generator Switch suits homes that want a small manual switch for essential loads only. It transfers power to heat, lights, refrigeration, solar, inverters and sump pumps, according to its stated uses.
Its 20 A rating and push button manual control keep the scope narrow and clear. You choose the essential load, flip the control, and keep the rest of the panel off during an outage.
At 4 x 4 x 4 inches and 16 ounces, it is far smaller than a full panel switch. That size helps in tight spaces, but it also means you should not expect whole home coverage.
EZ Generator Switch says it is UL/CSA approved and made in the USA. The maker also states bonded or floating neutral options, so confirm which neutral arrangement your setup needs.
The plug in mount and steel construction suit a simple indoor or sheltered spot. The 2-way circuit design and metal contacts support repeated manual use for the loads it names.
Compatibility covers battery inverters, solar inverters, heating systems, lighting circuits, convenience outlets, refrigerators, sump pumps and well pumps. That list is broader than a single outlet switch, yet the 20 A limit still sets a firm ceiling.
Buy it for compact essential circuit backup. Skip it if you need 240 V panel circuits or automatic changeover.
IGEYAPA 100Amp AC110V Automatic/Manual Transfer Switch 2P: Best for automatic source switching
- 100 A 110 V automatic/manual switch
- Switches within 0.05 seconds in automatic mode
- DIN rail mount
An automatic/manual dual power switch that can move from a normal source to a backup source quickly when the normal source fails.
Pros
- Automatic and manual modes
- Fast automatic changeover
- Over and under voltage protection
Cons
- 110 V focus limits whole home use
- Needs a compatible distribution box
The IGEYAPA switch suits buyers who want automatic changeover between two power sources. It is rated at 100 A and 110 V, with automatic and manual modes for a dual power setup.
In automatic mode, it can switch to the backup source within 0.05 seconds when the normal source is abnormal. That speed helps loads that cannot tolerate a long gap, such as critical equipment in a home or small business.
The switch also has 110 V over voltage and under voltage protection. The stated undervoltage value is 85 V, with recovery at 95 V.
The stated overvoltage value is 145 V, with recovery at 130 V.
DIN rail mounting means it needs a compatible distribution box, such as the PZ30 box named in its details. That is a different job from a plug in panel switch for a portable station.
The 2-pole design and copper contacts suit a 100 A dual power application at 110 V. The LED indicators show which source is active, so you can see at a glance whether Source A or Source B is supplying power.
Manual mode uses the left switch set to Manual and the red handle pointed to the source you choose. Automatic mode uses the left switch set to Auto and the red handle pointed to Source A.
Buy it for automatic 110 V dual power switching. Skip it if you need 240 V home panel backup or a ready made Anker SOLIX kit.
Connecticut Electric Series 2 Backup Power Manual: Best for 50 amp multi-circuit kits
- 50 A, 10 circuits
- 25 ft cord
- Outdoor rated 50 A inlet
A 50 amp manual kit with 10 circuits, a 25 foot cord and an outdoor rated inlet for larger essential loads.
Pros
- 10 circuit coverage
- Includes inlet and cord
- ETL certified
Cons
- Manual switching only
- Larger kit than a single circuit switch
The Connecticut Electric Series 2 kit suits homes with larger essential loads and a portable source that can supply up to 50 A. It covers 10 circuits and is shown for residential or small business use.
Its 50 A rating and 10 circuit layout support loads such as well pumps and HVAC equipment, according to its stated uses. The kit also includes a 50 A power inlet box with a weather resistant cover and a 25 foot cord.
That included cord matters in daily use. You can place the source where it fits, then connect it to the inlet without buying a separate cord for the kit.
The maker states ETL certification and double throw rocker switch technology to prevent backfeeding. A licensed electrician should still handle panel wiring and code checks for your home.
The metal construction and three phase listing in the specs reflect a build aimed at substantial loads. The 12,500 watt distribution figure in its details helps frame how the 50 A capacity is intended to be used across circuits.
Compared with a 30 A six circuit kit, this option gives more circuit choice. Compared with the 50 A twelve circuit option below, it trades two fewer circuits for a longer included cord.
Buy it for a 50 A multi circuit manual kit. Skip it if you want automatic switching or a smaller single circuit solution.
Xantrex 8080915 PROwatt SW Auto Transfer Switch: Best for inverter backup systems
- 15 A auto transfer switch
- 2 positions
- Plug-in mount
A compact auto transfer switch for inverter systems, rated at 15 A with automatic operation.
Pros
- Automatic operation
- Compact plug-in design
- Suits inverter setups
Cons
- 15 A limit
- Not a whole panel solution
The Xantrex PROwatt SW auto transfer switch suits inverter based backup systems rather than a full home panel. It is rated at 15 A and has automatic operation with two positions.
Its plug in mount and 10 x 7 x 4 inch size make it a compact part of an inverter setup. That scale suits selected loads, not a full breaker panel with many circuits.
Xantrex lists the model as 8080915 and the part number as 808-0915. The switch is shown in plastic with a 15 A current rating, so match it to the inverter and loads it is meant to serve.
In daily use, automatic operation is the main benefit. The switch can change sources without you flipping a manual lever, which helps when an outage starts while you are away from the equipment.
The rotary actuator and push button controller type give it a simple interface for an inverter system. The two position layout keeps the choice to one source or the other, rather than a panel of circuits.
At 16 ounces, it is light enough for a compact inverter enclosure. The IP54 rating in its specs also signals a degree of protection beyond a bare switch, within its intended setting.
Buy it for a compact inverter auto switch. Skip it if you need panel circuits, 240 V loads or an Anker SOLIX home power panel connection.
Nature's Generator 30 Amp Manual Transfer Switch: Best for six circuit home backup
- 30 A, 6 circuits, 120 V
- Pre-wired indoor kit
- L5-30P inlet and 30 A cord
A pre-wired 30 amp manual switch for six circuits, with an inlet and cord for portable power sources.
Pros
- Six circuit control
- Pre-wired construction
- Works with portable power stations
Cons
- 120 V only
- Indoor installation focus
Nature's Generator 30 amp manual switch suits homes that want six circuits of backup at 120 V. It is pre-wired for indoor use and includes a L5-30P inlet, a 30 A power cord and pre-wired components.
Its 30 A rating across six circuits lets you manage loads such as lighting, refrigeration and selected outlets. Manual selector switches let you choose specific circuits while keeping generator power isolated from utility power.
The maker states compatibility with lithium battery portable power stations, along with gasoline, diesel, propane, solar, wind and micro hydro sources. That broad statement helps if you plan to use more than one source type over time.
At 13 x 9 x 4 inches, it needs wall space near the panel. The illuminated rocker switches help show generator power status, which makes daily checks easier.
The stainless steel enclosure and wall mount design suit a fixed indoor location. The IP67 rating in its specs is higher than many indoor kits, even though the description frames the unit for indoor installation.
Interchangeable 1 inch breakers can be changed to different sizes and brands within the maximum ratings. Any pair of single pole circuits can also be used as a double pole circuit, which adds wiring flexibility.
Buy it for pre-wired six circuit backup. Skip it if you need 240 V circuits or outdoor installation.
Goal Zero Yeti Home Integration Kit Transfer: Best for four circuit panel backup
- 4 circuits
- 15 A
- For Yeti 1000 or above
A four circuit home integration kit for Yeti power stations of 1000 watts or higher, for indoor breaker panels.
Pros
- Four circuit backup
- Simple source change
- Designed for portable power stations
Cons
- Brand specific compatibility
- Indoor panels only
The Goal Zero Yeti Home Integration Kit suits owners of a Yeti 1000 or larger power station. It connects up to four vital circuits for backup power with one small switch.
Its four circuit limit keeps the job focused on essentials. You can run critical home circuits when main power goes out, then change the source with a switch after installation.
Goal Zero states that a qualified licensed electrician is needed, and that the kit works only with indoor circuit breaker panels. That limit is important, because panel type and code rules affect the whole setup.
The kit is rated at 15 A and measures 7.75 x 11.25 x 4.5 inches. It is a panel mount solution, so it is not a plug in cord you can move from room to room.
The rotary actuator and two position layout give a clear manual choice between sources. The metal contacts and plug in connector suit its role as a small panel mounted transfer point.
At 15 A, it matches a modest essential load plan rather than a large panel. If your Yeti station can supply more, the kit limit still governs what the panel side can pass through.
Buy it for Yeti based four circuit backup. Skip it if you own an Anker SOLIX station or need outdoor panel work.
Anker SOLIX F3800 Plus Portable Power Station: Best for Anker SOLIX home backup
- 3.84 kWh starting capacity
- 6,000 W output
- 120 V / 240 V dual voltage
- Includes transfer switch kit
The Anker SOLIX F3800 Plus station ships with a transfer switch kit and cable, and supports 120 V and 240 V home loads.
Pros
- Dedicated Anker SOLIX transfer switch kit
- Dual voltage output
- Expandable capacity
Cons
- Heavy at 136.5 lb
- Station and kit ship separately
The Anker SOLIX F3800 Plus kit suits Anker SOLIX owners who want home backup without piecing together a station and switch from separate brands. The box includes the station, transfer switch kit, AC charging cable, two solar charging cables, manual, warning notice and warranty card.
Its 3.84 kWh starting capacity and 6,000 W output support a full day of home power at the starting size, according to Anker. Capacity can expand to 26.9 kWh with six batteries, or double up to 53.8 kWh with 12 batteries.
Dual voltage support at 120 V and 240 V is a key daily benefit. Anker states you can run home appliances, including a dryer, without the usual single voltage limit.
At 136.5 lb, this is not a casual carry power station. It suits a fixed home backup spot where weight is less of a concern than output and expandability.
The station also supports 3,200 W solar input and a 240 V gas generator through a 6,000 W bypass for recharging. Recharging can be done in 63 minutes through solar and generator, according to Anker, which shortens the time to get outage ready.
Starting wattage is listed at 9,000 W, with running wattage at 6,000 W. That headroom helps with motor loads that draw more at startup, while the three outlet design keeps the station focused on home use.
Buy it for a matched Anker SOLIX home backup kit. Skip it if you need a lightweight portable station for camping or travel.
Nature's Generator 50 Amp Manual Transfer Switch: Best for 120/240 V flexibility
- 50 A, 12 circuits, 120/240 V
- CS6375 inlet
- Pre-wired indoor kit
A 50 amp manual switch that can be set up as twelve 120 V circuits or six 240 V circuits.
Pros
- 120/240 V flexibility
- 12 circuit coverage
- Includes CS6375 inlet
Cons
- Manual operation
- Indoor rated enclosure
Nature's Generator 50 amp manual switch suits homes that need 120 V and 240 V flexibility in one kit. It supports up to 12 circuits, set up as twelve 120 V circuits or six 240 V circuits.
Its 50 A rating and CS6375 inlet help with larger loads such as a fridge, furnace, well pump or sump pump. The kit includes the inlet, inlet box, 50 A power cord and pre-wired components.
Interchangeable breakers let you shape the panel to your loads. That flexibility helps when your essential circuits include both small 120 V loads and larger 240 V loads.
The enclosure is indoor rated steel, so plan for indoor mounting near the main panel. The maker states compatibility with portable generators and lithium battery portable power stations.
The rocker switches are rated for a maximum of 30 A, even though the switch assembly is rated at 50 A. That detail matters if you plan to upgrade a circuit to a 50 amp breaker, because the rocker limit still applies.
At 13 x 9 x 4 inches, it uses the same wall space class as the 30 A six circuit model. The IP67 rating in its specs sits alongside an indoor rating, so follow the indoor installation instruction rather than treating it as outdoor ready.
Buy it for flexible 120/240 V panel backup. Skip it if you need automatic switching or outdoor mounting.
Reliance Controls Pro/Tran2 Transfer Switch 306D: Best for compact manual control
- 20 A, 240 V manual switch
- Surface mount
- Powder-coated steel
A compact manual transfer switch in powder-coated steel, rated at 20 A and 240 V for selected backup loads.
Pros
- Compact surface mount design
- 240 V rating
- Manual control for selected circuits
Cons
- Limited circuit scope
- Manual operation only
The Reliance Controls Pro/Tran2 306D suits buyers who want a compact manual switch for selected loads. It is rated at 20 A and 240 V, with surface mount installation and a powder-coated steel body.
Its hinge lever manual control makes the source choice clear at the panel. You can manage a small set of backup loads without a full panel transfer system.
The maker lists compatibility with Reliance Controls backup generators up to 7,500 watts and 30 amps, while the switch itself is rated at 20 A. Match the source, switch and loads within the lowest rating in the system.
At 13 lb, it is heavier than a small plug in switch but still compact for surface mounting. That weight reflects its steel construction and panel role.
The three way circuit design and twelve positions in its specs show a panel oriented build. The screw terminal connector type also points to hard wired installation rather than a plug in setup.
Silver contacts and a black powder coated finish suit a permanent panel location. The 240 V operating voltage sets it apart from the 120 V kits in this guide, so check your panel type first.
Buy it for compact 240 V manual control. Skip it if you need many circuits, automatic operation or a dedicated Anker SOLIX kit.
How to compare an Anker SOLIX transfer switch and home power panel cable
Compare voltage, amps, circuit count, mounting and included accessories before you compare brands. Those five points decide if a switch fits your station and panel.
We checked current rating, voltage, circuit count, control type, mounting type and included components. We also checked which power sources each maker names as compatible.
An Anker SOLIX home power panel cable is a separate accessory from a generic transfer switch. The F3800 Plus kit includes an Anker SOLIX transfer switch and cable, while other kits include their own cords and inlets.
What the ratings mean in practice
A 15 A switch cannot match a 50 A panel kit. A 120 V switch cannot be used for a 240 V circuit by adding more breakers.
A DIN rail switch needs a box that accepts DIN rail parts, while a plug in switch needs a suitable outlet or panel point.
| Product | Best for | Current rating | Control type | Mounting type | Our score |
|---|---|---|---|---|---|
| The Original EZ GENERATOR SWITCH | compact essential circuits | 20 A | Manual | Plug-In Mount | 9.7 |
| IGEYAPA 100Amp AC110V Automatic/Manual Transfer Switch 2P | automatic source switching | 100 A | DIN Rail Mount | 9.6 | |
| Connecticut Electric Series 2 Backup Power Manual | 50 amp multi-circuit kits | 50 A | 9.3 | ||
| Xantrex 8080915 PROwatt SW Auto Transfer Switch | inverter backup systems | 15 A | Plug-In Mount | 9.1 | |
| Nature's Generator 30 Amp Manual Transfer Switch | six circuit home backup | 30 A | 8.9 | ||
| Goal Zero Yeti Home Integration Kit Transfer | four circuit panel backup | 15 A | 8.6 | ||
| Anker SOLIX F3800 Plus Portable Power Station | Anker SOLIX home backup | 8.4 | |||
| Nature's Generator 50 Amp Manual Transfer Switch | 120/240 V flexibility | 50 A | 8.2 | ||
| Reliance Controls Pro/Tran2 Transfer Switch 306D | compact manual control | 20 A | Surface Mount | 7.9 |
A generic manual switch can work with a portable power station, but it does not become an Anker SOLIX home power panel by itself. Check the station manual and the switch rating together.
For context on Anker SOLIX home systems, read what is an Anker SOLIX power dock. That guide explains how a power dock fits into a home setup.
Can a manual transfer switch work with an Anker SOLIX station?
Yes, a manual transfer switch can work with a compatible portable power station, including lithium battery stations named by some makers. You still need matching voltage, amps, inlet type and panel wiring.
Manual switches for portable power stations
Nature's Generator states that its 30 amp and 50 amp manual switches work with lithium battery portable power stations. That makes them candidates for panel backup with a compatible station.
Manual switches for essential loads only
The EZ Generator Switch lists battery inverters among its compatible devices. It suits a small set of essential loads rather than a full panel.
When manual control is a poor fit
Manual switches need you to be home and to flip the control. If you need unattended changeover, look at automatic options.
Which automatic transfer switch is best for fast changeover?
The IGEYAPA switch is the fastest automatic option here, with a stated changeover within 0.05 seconds. It is built for 110 V dual power switching, not 240 V whole home backup.
Automatic mode and manual mode
In automatic mode, the switch moves to the backup source when the normal source is abnormal. In manual mode, you choose Source A or Source B with the red handle.
Voltage protection
The IGEYAPA lists undervoltage and overvoltage protection with stated trip and recovery values. Those values help protect the switch and connected loads from abnormal voltage.
For a broader look at backup switching, read How Does a UPS Battery Backup Switch to Battery Power?. It explains the idea of source changeover in plain terms.
What size transfer switch do I need for home circuits?
Size the switch by your essential loads, not by your whole panel. Add the amps for the circuits you must run, then choose a switch with headroom.
Amps for essential circuits
A 15 A or 20 A switch suits a small set of loads. A 30 A or 50 A switch suits more circuits, but only if your source can supply that power.
Circuit count for panel backup
Four circuits can cover lights, fridge, sump pump and one outlet group. Ten or twelve circuits can cover more, but unused circuits do not help if your station runs out of power.
Voltage for 120 V and 240 V loads
Some homes need 240 V for well pumps, HVAC or a dryer. If your station supports dual voltage, your switch and panel wiring must support it too.
Our whole home battery backup system guide helps you decide which loads are truly essential.
Do you need an Anker SOLIX home power panel cable or a generic switch?
You need the Anker SOLIX home power panel cable when you use a station and accessory set that calls for it. A generic switch is a different path, with its own inlet, cord and panel wiring.
Dedicated Anker SOLIX kits
The F3800 Plus kit includes the Anker SOLIX transfer switch and transfer switch cable. That matched set is the simplest path for that station.
Generic panel kits
The Connecticut Electric and Nature's Generator kits include their own inlets and cords. Those parts are part of the kit design, not Anker SOLIX accessories.
Safety and code checks
Panel work should be done or checked by a licensed electrician. Backfeeding protection, neutral setup and local code rules matter for every option.
Learn more about Anker SOLIX home options in our Anker SOLIX E10 review and Anker SOLIX X1 review.
How fast should a transfer switch change sources?
Match changeover speed to the loads you need to protect. A manual switch takes as long as it takes you to flip it.
An automatic switch can change in a fraction of a second.
Manual changeover in daily use
Manual switches suit loads that can wait a few minutes. Fridges, lights and sump pumps often fit that pattern during a planned outage response.
Automatic changeover for critical loads
The IGEYAPA states a 0.05 second changeover in automatic mode. That speed suits loads where even a short gap matters.
UPS style backup for sensitive electronics
Some electronics need a different kind of backup than a panel transfer switch. Read [How Fast Does a UPS Switch to Battery Power?
A Simple Guide](/how-fast-does-a-ups-switch-to-battery-power/) if speed is your main concern.
Which Anker SOLIX transfer switch should you buy?
Buy the Anker SOLIX F3800 Plus kit if you own or plan to buy that station. It is the only matched Anker SOLIX kit in this guide, with a dedicated switch and cable.
Pick the Connecticut Electric 50 amp kit if you want 10 circuits and an included 25 foot cord. Pick the Nature's Generator 50 amp switch if you need 120/240 V flexibility across 12 circuits.
Pick the IGEYAPA if automatic 110 V changeover matters most. Pick the EZ Generator Switch if you want a compact manual switch for essential loads only.
For sensitive electronics, a UPS may be a better tool than a panel switch. For whole home planning, start with our whole home battery backup system guide, then match the switch to the loads you choose.
Our top 3 picks at a glance
-
1
Best for compact essential circuitsThe Original EZ GENERATOR SWITCH
9.7/10 our score
See it on Amazon -
2
Best for automatic source switchingIGEYAPA 100Amp AC110V Automatic/Manual Transfer Switch 2P
9.6/10 our score
See it on Amazon -
3
Best for 50 amp multi-circuit kitsConnecticut Electric Series 2 Backup Power Manual
9.3/10 our score
See it on Amazon
Frequently asked questions
What is an Anker SOLIX transfer switch?
An Anker SOLIX transfer switch connects a portable power station to selected home circuits. The Anker SOLIX F3800 Plus kit includes a transfer switch and cable for that job.
Other manual switches in this guide can connect compatible portable power stations to a panel.
Do I need a home power panel cable?
Some Anker SOLIX setups use a home power panel cable to connect the station to a panel or transfer switch. Check your station model and the required accessory before you order.
A licensed electrician should confirm the connection for panel work.
Can a portable power station back up 240 V loads?
Some stations support 240 V output, and the F3800 Plus lists 120 V and 240 V dual voltage support. The transfer switch and panel wiring must match that voltage.
Confirm both the station rating and the switch rating before you plan 240 V circuits.
Is a manual or automatic transfer switch better?
A manual switch lets you choose circuits and sources by hand. An automatic switch changes sources when the normal source fails.
Automatic switches suit loads that need faster changeover.
Manual switches suit simple essential circuit backup.
About this guide: Our look at Anker SOLIX transfer switch and home power panel options draws on maker specs, materials and what owners report. See how we research.



